Santa Fe Classic

Santa Fe Classic Resources

 
 

Sante Fe Classic Performance and Technical Specifications

Part Number:   4021400
Blower:   275 CFM @ 0 IWG
Kilowatts:   .61 (80°F, 60% RH)
Supply Voltage:   115 volt - 1 phase - 60 Hz
Amps:   6.8
Energy Factor:   2.75
     
Water Removal Performance
Intake Air:   80°F, 60% RH
Water Removal:   100 Pints/Day
Pints/KWH:   5.9
     
Product Dimensions
Width:   20"
Height:   36"
Depth:   17"
Weight:   110 lbs
     
Shipping Dimensions
Width:   28"
Height:   45"
Depth:   24"
Weight:   127 lbs.
     
CFM = cubic feet per minute
IWG = inches of water gauge
 
 
 

Santa Fe Classic Testimonials

Humidity was so high in our basement that we had mold on the walls, which contributed to our child's health problems. Once the dehumidifier was installed absolutely all mold growth stopped and our child's health improved—respiratory ailments have disappeared.

Mary
Burre, MA

I had a smelly,musty basement with 70-80% relative humidity. Since we installed the Santa Fe Classic my basement is much drier and smells normal—no more damp, musty smell! No more mold problem! My relative humidity averages about 50-53% now.

Rob
Rocky River, OH
Santa Fe Ultra Efficient Dehumidifier
  • High-capacity moisture removal and low-temperature operation
  • Controls humidity and reduces musty odors
Transform Your Basement

The Santa Fe Classic Dehumidifier removes odor-causing moisture and maintains EPA recommended relative humidity levels of 45 to 50%—ideal conditions for an odor free storage space or comfortable living space for you and your family.

If you store anything of value in your basement or if you use your basement as living space, it is important to keep the moisture levels low. Relative humidity levels rising above 70% stimulate the growth of mold, mildew, bacteria and other biological allergens, which generate musty basement odors. These conditions must also be prevented in microenvironments such as underneath carpeting, rugs, or storage boxes. The Santa Fe Classic is the most energy-efficient dehumidifier in the industry and offers time-tested technology to maintain 50% or less relative humidity in your home as recommended by the EPA, American Lung Association, and American Medical Association.

Energy Star Listed: Uses only 6.8 amps of electricity offering as much as $275 per year in energy savings compared to the conventional dehumidifier. More pints of water per kilowatt of electricity means lower cost of operation.

Large Capacity: This high capacity basement dehumidifier removes up to 100 pints of water per day—enough water removal capacity for areas up to 2,500 square feet.

Low Temp Operation: Powerful enough to control humidity even in the cooler environments of basements. Dehumidifiers are rated at 80°F and 60% relative humidity. At the cooler, real-life temperatures of a basement, the capacity of conventional dehumidifiers drops dramatically.

At temperatures below 65°F, frost forms on the coils of a conventional unit and causes the unit to ice-up. Frost cuts down on air circulation so the unit does not remove as much moisture from the air. Some units have automatic defrost but remove minimal quantities of water in cooler conditions. However, even at regular basement conditions, the Santa Fe Classic removes more pints of water per day than most dehumidifiers.

MERV-11 Filtration: The Santa Fe Classic Series utilizes a blower rather than a propeller fan allowing the use of high-efficiency air filtration for improved indoor air quality. Standard MERV-11 filtration is 65% efficient and captures particles from 1.0 to 3.0 microns in size—resulting in effective filtration of most mold spores.

Optional Ductability: Attaching ductwork to the unit promotes air circulation throughout the basement, allowing for placement of the dehumidifier in a remote location such as the mechanical room.

Energy Star Listed
 
ENERGY STAR @ home
 
 
 
Optional Accessories for the Sante Fe
 
Part No.   Description
4021453   Santa Fe Classic Duct Kit: 8" and 6" return and 8" supply collar
4020623   8" Supply collar
4022220   Condensate Pump Kit: 3/8" ID x 20' long hose with 15' lift, pump, mounting bracket*
4022561   Muffler Kit*
4020175   Honeywell Dehumidistat (Professional Installation Required)
4021468   Black foam prefilter
4021475   Standard filter (16" x 20" x 2") MERV-11
     
*The Muffler Kit and Condensate Pump Kit may be used together, but the pump will not be able to be mounted to the unit.